ELECTROLIZER PTV - K

Purpose

FEATURES AND USAGE OF ACTIVATED WATER

Many of us have heard fairy tales in which heroes regained their power and youth after they had been sprinkled with live water. Nowadays the fairly tales take traits of reality: water activators give these extraordinary features to water.
Drinking water becomes activated during electrolyses: in one dish of the device water becomes live (alkaline), in the other – dead (acid) – loaded with low electric charge. In this way activated water, as it has similar electric charge to that of liquids of an organism (blood, Lymph), joins the life activity at once. It helps to recover energetic state of an organism, to remove reasons of illnesses, strengthens the immunity, etc. It is a product of nature which helps to enliven healing powers of an organism itself.
Live water (pH 10-11) - scentless and tasteless (reminds of rain water). Residues appear in it, indicating pollution of drinking water. It stimulates the whole organism, cell regeneration, gives energy, freshness, heals different scratches and wounds fast. Live water slightly rises blood pressure, effectively heals stomach and duodenum ulcer, prostate adenoma, yellow jaundice, psoriasis, helps with digestive troubles and help to avoid constipation, etc.
Dead water (pH 2.5-3.5) has a slightly sour taste and bactericidal properties. It brings blood pressure down, helps to ease nerves, makes sleep better, dissolves salt concentrated on bones, reduces pain in joints, cures varicose veins, dental diseases, lumbago, osteoxondrosis, and others. It is the first helper when having a cold, a sore throat or influenza.
Activated water is also used in beauty therapy (softens skin, smoothes wrinkles), gardening, vegetable growing, cattle breeding.
One can find out more about activated water in the book written by P. Sibilskis “Activated and Argentiferous Water”, it summarizes experience of scientists and medical people from different countries, and gives more than 100 pieces of advise on how to use this source of health.Purpose: to produce two kinds of water: activated or arginteferous.

FEATURES AND USAGE OF ARGENTIFEROUS WATER

Healing properties of argentiferous water have already been known in old times. Water kept in silver dishes (for ex. sacred water kept in churches) remains fresh for a long time. Even a small amount of silver destroys bacteria and microbes when it get into water. Water filters used in everyday life reduce chemical water pollution; argentiferous water eliminates biological pollution as well. It becomes free from microbes, bacteria that are agents of different diseases.
Small amounts of anger stimulate blood-making organs, increases amount of albumen in blood. It is enough to switch the electrolizer for 2-3 seconds and 1,4 liters of argentiferous water is being made, which is suitable for everyday needs. Such biologically clean and staying fresh for a long time water is elixir of health.
The above mentioned book by P. Sibilskis gives more information on application of argentiferous water for different purposesl.


Parameters

WATER ELECTROLYZER
 PTV-K
PTV - K        PTV - K

1. GENERAL PROVISIONS

1.1 Definitions used :

1.1.1 Water electrolyzer - the appliance used to produce activated or silvered water by means of the electrolysis process taking place in it.

1.1.2 Activated water - the product of electrolysis - two types of water (catholyte and anolyte).

1.1.3 Catholyte - the water having alkaline characteristics and induced with a weak negative charge. It is also called live or alkaline water

1.1.4 Anolyte - the water having acidic characteristics and induced with a weak positive charge. It is also called lifeless or acid water

1.1.5 Partition - wood fibre plate (plates) dividing the vessel into two parts and permeable to ions, but preventing the water on both sides of the plate from mixing up.

1.1.6 Silvered water - potable water having respective concentration of silver ions. Such concentration is measured by milligrams in a litre (mg/1)

1.1.7 The appliance meets the requirements for general and electrical safety. applicable to such appliances.

p.s. when purchasing the appliance please check whether all its components are intact.

2. TECHNICAL DATA

The company is producing three modifications of the appliance: modification K - for production of activated or silvered water; modification A -for production of activated water only; modification J - for production of silvered water only. Their technical parameters are shown in the table below.

Parameters

Parameter value for electrolyser modifications

K

A

J

Vessel capacity, 1

1.4

1.4

1.4

Power supply voltage, V—

220

220

220

Average duration of electrolysis

when generating:

- activated water, min.

25

25

- silvered water, sec.

2-3

2-3

Silver electrode mass (assay 999,9), g

9,7+/-0,1

--

9.7+/-0.1

Average power consumption when

generating:

- activated water, W

75

75

silvered water, W

2

--

2

Appliance total weight, not

exceeding, kg

1.0

1,0

1.0

Dimensions, mm

190x160x200

190x160x200

190x60x200

 

WATER ELECTROLYZER PTV Modification K

Purpose: to produce two kinds of water:
            activated or arginteferous.
Technical data:
Dish capacity    1,4 l
Feeding voltage 220 V~
Average duration of electrolyses:
Producing activated water 25min
Producing arginteferous water  2-3 s
Using Power:
Regime of activator 75 W
Regime of ionizer 2 W
Weight of device no more than 1kg
Size dimensions: 190xl60x200mm
Complete set:
Electrolyzer PTV - K
Spare partition – 1 set
Technical description and instruction for usage – 1
Package box - 1
Guaranteed period:
18 months from the date of selling.

3. ITEMS OF THE SET

Name

Modification

K

A

J

Water electrolyser PTV

1

1

1

Technical description and User's Manual

1

1

1

Set of spare partitions

1

1

-

Plug

1

-

-

Holder with round electrodes

1

-

-

Packing carton

1

1

1

4. CONSTRUCTION OF THE APPLIANCE AND OPERATION PRINCIPLE

4.1 The appliance consists of the lower vessel (1), removable vessel (4) and the cover (10) (see fig.l)

4.2 The lower vessel is the vessel where the electrolysis takes place. On both sides, close to its rim there are handles (2) with metal pins (3). The semi-circular removable plastic tank (4), with a wood fibre partition (5) as its front wall, is put into the lower vessel (There is neither partition nor removable tank in modification J). There are two markings on the inside wall of the lower vessel and the removable tank: the lower mark (7) indicates minimum, the upper (8) mark indicates maximum water level. The partition is kept in place by a special fastener (6).

4.3 The wiring is installed in the cover (10) and it is covered by a plastic lid. The electrodes are mounted in the cover: flat electrodes (9 and 20) are intended for generating the activated water (modifications K and A) and round electrodes (18 and 19) - for production of the silvered water (modifications K and J). In the cover of the modification K there is plug to cover the openings for installation of round electrodes when the electrolyser is used for production of activated water.

When placing the cover on the lower vessel, the pins (3) actuate the contacts of the micro switches fitted in the cover handles (11) and only then the mains is supplied to the wiring. There are three LEDs installed on the decorative panel (13) on the top of the cover: the central green LED (15) turns on when the mains cable plug is inserted in the mains socket, and the two red LEDs (12, 16) on its sides light when the activated or silvered water is produced respectively.

The three-position-switch (17) allows to switch-on the appliance (modification K) for production of either activated or silvered water. In modifications A and J there is a two position switch. The electrical wiring is designed so that it is not possible to operate in both activated and silvered water generation modes. On the side of the cover there is a cable with a plug (14).

4.4 The partitions (5) are inserted into specially designed grooves in the removable tank (4) (modifications K and A).

4.5 In the course of electrolysis, the lifeless water is generated around [lie positive electrode - anode, and the live water is generated around the negative electrode-cathode. The partitions (5) of the removable vessel (4) ensure the live and lifeless waters do not mix up.

4.6 When generating the silvered water only, the removable tank (4) should he taken out from the vessel (1) (modification K).

4.7 During production of silvered water, the positive (silver) electrode (18) is disintegrating and in this way the water is supplied the required volume of 'silver ions.

5. PROPERTIES OF ACTIVATED WATER AND ITS APPLICATION

5.1 Live water is soft, odourless and resembles the rainwater when tasted. Immediately following the reaction there is small quantity of foam appearing on the water surface. After you pour it into ajar, the water is turbid, however in 15-20 min. the deposit will settle down and the water becomes clear and fit for consumption (the volume of the deposit shows the level of water contamination).

5.2 Live water stimulates propagation of plants, accelerates sprouting of seeds, blossoming of home flowers, revitalises the picked up green vegetables, laded flowers and has the stimulating effect in general.

5.3 Lifeless water is of sour taste with odour characteristic of acid.

5.4 Lifeless water is good for disinfecting soil, tare, footwear, it is good for small pests, various micro organisms and fungi control.

5.5 Both live and lifeless water should be kept in tightly closed Containers out of reach of direct sun radiation. Keeping in a refrigerator is not recommended. The live water maintains its properties up to 7 days, lifeless water - up to 15 days.

5.6 "pH" is the conventional unit used for evaluation of hydrogen ions concentration. and it may vary from 0 to l4 points. The potable water is neutral and its pH level is approximately 7.0.  The pH level of the live water actually available to consumers varies from 8,0 to 11.0 (the higher the pH level, the more alkaline water is), for lifeless water the pH level is 5.5 to 2,8 (the lower the number the more acidic the water is).

5.7 Dependence of the concentration of hydrogen ions (pH) in the activated water on the activator's Operation time is shown in Table l. The present values have been obtained by activating the water available from the local (Panevėžys) water supply System with its incoming pH is approximately 7,4. In the event the water in other areas is of different composition, the concentration values may he slightly different. Variations in concentration of+/- (0,2 to 0,3) pH are practically insignificant.

Activator Operation (electrolysis) time. min

 

Average concentration in activated water, pH

 

Live water

 

Lifeless water

 

5

 

8.5

 

6.1

 

10

 

8.9

 

4.9

 

15

 

9.2

 

3.6

 

20

 

10.3

 

3.0

 

25

 

10.7

 

2.8

 

30

 

10.8

 

2.6

 

35

 

10.8

 

2.5

 

40

 

10.7

 

2.4

 

Note.  Leaving the appliance in Operation for periods exceeding 40 minutes is PROHIBITED.

6. PROPERTIRS OF TUE SILVERED WATER AND ITS APPLICATION

6.1 I he silvered water destroys microbes and bacteria. Small doses of silver (0,01 mg) have positive effect on the organism.

6.2 The effect of silvered water application is felt after considerable period of time and depends on the concentration: the higher the concentration, the faster the effect of the water used is achieved.

6.3 The silvered water maintains its properties for several months.

6.4 Water taken from water supply systems or wells may be used for generation of silvered water. It is recommended to use filtered water, or the water from the water supply system that has been standing for several hours in order to achieve evaporation of chlorine from it.

6.5 Properly prepared silvered water of low concentration (up lo 0.05 mg/l) is absolutely clear, odourless and tasteless. It should be stored in the dark or in wares protecting the water from daylight. The water should not be boiled as in such a case the silver turns into the deposit and the water loses the properties acquired.

6.6 In case the silvered water is used for drinking on regular basis, die silver concentration should not exceed 0,01 mg/I (UN 48-1994. Harmful substances. Their concentration and temporarily admissive levels in water used for human consumption).  Such concentration is achieved when the appliance is kept switched on for 2 seconds. (See Table 2)

Activator Operation time, sec.

 

Silvered water concentration, mg/l

 

2

5

10

20

30

0,01

0,027

0,056

0,104

0,155

 

7. SAFETY REQUIREMENTS

7.1 The appliance may be connected to the mains network only after it has been prepared for Operation, i.e. the vessel(s) liave been filled with water and the cover (10) has been put on.

7.2 It is PROHIBITED:

7.2.1 To remove the cover (10) from the lower vessel or take off die lid of the cover when the appliance is connected to the mains network.

7.2.2 To keep the running appliance close to open flame and to scintillating equipment.

7.2.3 To leave the appliance switched on for periods longer than specified in the user's manual.

7.3 Keep the running appliance away from reach of children and do not leave unattended.

8. PRODUCTION OF ACTIVATED WATER (MODIFICATIONS K and A)

8.1 Holding the lower vessel (l) by its handles(2), lift it up and remove the appliance cover(10)

8.2 Check whether the partitions (5) have been tightly inserted into the groves of the removable tank.

8.3 Pour in some water: first into the removable tank, and then to the lower vessel to the lower marking.

8.4 Carefully replace the cover (10) onto the lower vessel so that the dark electrode goes into the removable tank (4), and the pins (3) could easily slip into the holes located in the handles of the cover.

8.5 Connect the appliance to the mains (insert the plug of the mains cable into the outlet), place the switch to position A (modification K) or place it to "on" (modification A) and take note of the switching-on time. The green LED and the red A L1ZD should illuminate. The time for running the appliance shall be established according to Table l.

8.6 After the selected time has elapsed, turn the switch to neutral (middle) position (modification K) or switch it off (modification A), pull out the plug from the mains socket, take off the cover and pour out first the lifeless water and then the live water into prepared separate tanks, that can be tightly closed.

A small quantity of foam on the surface of the live water, and acid odour coming the lifeless water as well as a little hot water show that the water got activated.

8.7 Rinse the vessels immediately. The light colour electrode should be cleaned using soft cloth soaked with table vinegar.

8.8 After the partitions (5) become dry, assemble the appliance and keep it in dry place.

Notes:

1. During usage the partition may bloat and bow. This does not have any impact on the water quality. The most important thing is to ensure that the partitions prevent the waters from getting mixed. When rinsing the removable tank, the partitions should not be removed. There is no need to collect the foam appearing on the surface of live water. The foam would turn into deposit and the water becomes clear.

2. If you notice that the exterior coating of the dark electrode is damaged, then it is recommended to replace it by a new one.

3. If you wish to prepare another portion of activated water, fill the appliance with water again and connect it to the mains.

4. Spare electrodes and partitions can be obtained at retail points dealing in such appliances.

9. PRODUCTION OF SILVERED WATER (MOD1FICATIONS K and J)

9.1 Holding the lower vessel (l) by its handles (2), lift it up and remove the appliances cover (10).

9.2 Remove the plug from the cover und place the electrode holder with round electrodes into the openings (18, 19) (modification K). Different diameters of openings and plugs ensure that these electrodes arc installed correctly.

9.3 Take out the removable tank (it is not required for generation of silvered water).

9.4 Pour in some water to the level between the two marks.

9.5 Put on the cover (10) on the lower vessel (l) in the way that the pins (3) easily enter the holes in the cover handles.

9.6 Insert the plug of the mains cable into the outlet, decide on the time of running the appliance according to Table 2, then turn the switch to position J (modification K) or place it in "on" position (modification J). E.g. if the reiquired operation time is 2 sec.. then it is enough to slowly pronounce „twenty one“ and turn the switch off.

9.7 Disconnect the plug from the mains socket, take off the cover and pour out the silvered water into any dark or tinted tank.

9.8 Periodically clean the round electrodes using soft cloth. More contaminated electrode maybe cleaned with soft cloth soaked in table vinegar. Dark coating appearing on the silver electrode does not have any impact on the quality of the silvered water.

9.9 Assemble the appliance and keep it in dry place.

Note. 9.2 and 9.3 are not applicable lo electrolyser of modification J as there are neither removable tank nor plug.

No

Symptom of failure

Possible cause

Remedy

1

2

3

4

1.

Appliance cannot be switched

on, LEDs do not illuminate,

electrolysis is not taking place

Mains voltage absent

Check the voltage in

the mains socket

2. Water does not get activated to the level expected during the time specified

1 Partitions are contaminated

2 Light colour electrode is contaminated

Replace the present partitions by new ones Clean the electrode using table vinegar
3. The apliance is on, the LEDs are on, but the reaction in A mode is not taking place Portitions are completel contamined

Replace the present partitions by new ones

4. In A mode the water gets hot, but activation process does not take place Electrical writing failure

Contact the manufacturer or its representative

5. Red LED "J" does not light in J mode Water level in the vessel is too low (the electrodes are not sufficiently immersed)

Pour in some water to the level between the two marks

11. WARRANTY

11.1   The appliance meets the requirements of Company Standard ĮST 479 5221 06.2001.

11.2    The Warranty period shall be 12 months from the day of purchase or 15 months from the date of manufacture provided the user has observed all requirement of this manual.

11.3    The appliance found defective during the warranty period must be returned to the retail outlet where it was bought or to the manufacturer.

11.4   The warranty does not cover the appliances with mechanical damages.


Certificate



Frequently asked questions

ABOUT ACTIVATED WATER

1.How does water influence our health?

Water constitutes 70 % of a human body. There are 40-45 litres of various liquids in each body: 5 litres of blood, 28 litres of cellular and non-cellular liquid, etc. Life is nothing but movement of these liquids in cells and among them. If this movement slows down, a person falls ill. People often do not understand that many ailments are caused by shortage of water in their organisms. The amount of water that the body itself is able to generate out of fats and carbohydrates is only 300 grams a day. That’s why it is recommended to drink 2-2,5 litres of liquids each day. Quality of the water we drink is also very important.

2.What are the advantages of activated water?

Composition and qualities of activated water are very close to those of the body liquids than the composition and qualities of ordinary potable water. That’s why it immediately joins vital activities of the organism and makes great impact on our health.

3.How does water become activated?

Activated water, otherwise called living and liveless water, is made of ordinary water by way of electrolysis. Water electrolysis is performed in a device with two separate sections (electrolyser PTV-A or PTV-K). The water is divided into two parts. Water in one section acquires a weak negative charge and becomes alkaline (pH = 10-12). Such water is called living water or catholyte. Water in the other section acquires a weak positive charge and becomes acidic (pH = 2-4). This is liveless (dead) water or anolyte.

4.What gives activity to water?

Water activity depends on two factors. One is the charge acquired (i.e. water becomes a weak electrolyte, like body liquids) and the other is its alkaline or acidic medium.

5.How does the effect of activated water manifest itself?

Liquids of a human body (blood, intercellular liquid, etc.) are weak electrolytes. As activated water has a similar charge, the body immediately recognises it as “one’s own” and such water takes part in body activity processes. The science of medicine defines an illness as a disorder of cellular energetic system. Activated water effectively eliminates such disorders and their causes.

Besides, different pH of the two parts of activated water influences alkaline-acidic balance of the body.

It is also important that anolyte naturally enriches our bodies with positive hydrogen ions (protons) as shortage of protons is the cause for many illnesses.

6.What are the properties of living water and why was it called “living”?

Living water (catholyte) acquires a small negative charge and becomes alkaline (OH-). Thanks to these properties such water stirs up all the body, gives it energy and briskness, stimulates cell regeneration, gently increases blood pressure, is very efficient for treatment of various scratches and wounds. That’s why it’s called “living water”. The water contains some deposit, its quantity shows how polluted drinking water is. These are oxides of heavy metals, radionuclides.

It was established that living water regulates the amount of calcium in blood. Surplus of calcium can cause osteochondrosis, atherosclerosis, polyarthritis. That’s why blood acquires weak acidic medium and performs functions of antioxidant by removing excess amount of calcium from the organism. This is one of the preconditions of long life.

7.“Liveless water” sounds rather strange, is it worse than living water?

Liveless water is also good for the body. Thanks to its positive charge, acidic medium (H+) and a small amount of chlorine this water acquires bactericidal properties. Thus liveless water kills bacteria, small pests, and is used as a disinfectant. That’s why it is called “liveless water”. It reduces blood pressure, improves one’s sleep and has a tranquillising effect. Liveless water can dissolve salts, stones, and reduce pain in joints. This water is very efficient in treatment of cold, sore throat, or influenza. It is very good to rinse one’s mouth and nose with liveless water in the evenings, i.e. to disinfect these cavities and destroy pathogens.

8.Can liveless water stop the process of growing old?

According to the Russian scientist V. Volkov, people get old and ill because the amount of cellular liquid used for generation of positive hydrogen ions H+ (protons) increases. The older is the person, the smaller is the amount of water in his/her body. Cells loose their liquid, their functions get weaker and finally the cells die. The scientist draws the following conclusion: if the body is provided an opportunity to restore the missing level of hydrogen ions (protons), it might be possible to reduce not only sickness rate and ageing but even to stimulate renewal of the body. V. Volkov recommends using liveless water (anolyte) as the concentration of hydrogen ions (protons) in it is higher. Such water is easily adopted by the organism and efficient in replenishing the body with hydrogen ions.

9.Perhaps activated water is a universal remedy?

Universal medicine will hardly ever be invented. But activated water is very important for those who love themselves (love here is understood as ability to avoid illnesses, to enjoy life), and propagate healthy way of life. It is a natural source of life, not an artificial chemical product. Properties of activated water make it similar to body liquids, help to activate our vital powers. Activated water is very effective as a means of prophylactics. The most important is not to cure the disease but to avoid it.

10.Is activated water applied in other spheres?

Sure it is. Activated water is well-evaluated by gardeners, flower-growers, and farmers. If seeds are kept in activated water before planting they sprout faster, give faster and larger yield. Chicken, goslings, calves, and piglets grow faster if they drink activated water.

The harvest collected in autumn can be stored for a longer period if it is treated with liveless water (sprayed or immersed).

11.Where can we find more information about activated water?

The book “Activated and Silvered Water” by P. Shibilskis gives general overview of the experience of foreign scientists and over 120 recommendations how to use this source of health for treatment of various illnesses, in our daily life and agriculture.

ABOUT SILVERED WATER

1.What is special about silvered water?

Curative, disinfecting and preserving properties of silver have been known since ancient times. Water kept in silver ware (remember consecrated water kept in churches) remains fresh for a very long time. The secret is simple. Even a small quantity of silver in water or other liquid destroys bacteria and microbes. Silvered water is water enriched with positive silver ions. The source of silver ions is a silver (assay 999,9) electrode installed in electrolysers PTV-J or PTV-K. During electrolysis the necessary amount of silver ions gets into water.

2.What is the effect of silvered water?

Silvered water is biologically clean, it contains no microbes, bacteria that often cause various diseases. Such water is a wonderful means of prophylactics. Small doses of silver stimulate physiological processes and blood production, increase the amount of protein in blood, strengthen immunity system.

Another important property of silvered water is that it destroys bacteria and viruses (antibiotics fight only bacteria). Positive silver ions oxidise pathogens, they loose their negative charge and die.

3.What should the concentration of silvered water be?

Effect of silvered water depends on silver concentration, which is measured by milligrams in litre (mg/l). The higher is silver concentration the stronger is the effect.

For example, water with 0,05 mg/l silver concentration would destroy microbes within 5 minutes, 0,2 mg/l concentration – within 2 minutes, and 1 mg/l concentration would start its activity immediately. The latter dose would kill intestine rods within 3 minutes, the dose of 0,5 mg/l – within 20 minutes. Silvered water of high concentration is used for lotions, wet compresses, disinfecting, etc.

Concentration of silvered water for everyday use must not exceed 0,01-0,02 mg/l.

4.What is the difference between silvered and filtered water?

Water filters reduce physical and chemical pollution of water. In addition to that, silver in water reduces biological pollution, i.e. water becomes biologically clean.

5.Where can we find more information about silvered water?

The book “Activated and Silvered Water” by P. Shibilskis gives over 30 recommendations how to use this water for treatment of various illnesses. Besides, such information can be found in specialised literature of medicine.


Payment

 

Products

Retail price, EUR
with delivery worldwide

ELECTROLYZER PTV:

 

Modification A

85

Modification K

110

Modification J

85

Converter AC/AC 110/220V

30

Into the price is included:

The complete set elektrolizer PTV
Additional spare partitions - 10 pieces.
P.Shibilskis book of the botfly - a source of health

You can find further information at: http://www.h-longevity.net/eng/c02m1t1.shtml

 

 
 
©2004 WaterNet - Web design by Perfect PCs